Aquavox 401X
CRYSTALLIZED WATERPROOFING MORTAR

BARCODE ITEM NO TYPE
643845887704 WU7704 50 LB

AQUAVOX 401X CRYSTALLIZED WATERPROOFING MORTAR
Single Component Waterproof Mortar
Suitable for Use in Contact Of Water
Flexible & Polymer-modified
Water Repellant
Guards Against Humidity
Waterproofing
•Bathrooms & Showers Before Laying Ceramic
Tiles
• Concrete Basins of Potable Water
• Decorative Pools
• Terraces
• Balconies

Cement based one component flexible waterproofing mortar, which is resistant to positive and negative water pressure and which penetrates into capillary gaps for waterproofing purposes and protects from humidity.

Areas Of Use

AQUAVOX 401X is used for negative and positive waterproofing of sound concrete surfaces in independent swimming pools, sewage and waste water treatment plants, basements, water tanks, elevator shafts, warehouses and parking garages. It is suitable for use on horizontal and vertical surfaces of indoors and outdoors spaces.

Product Advantages

•Fit for contact with drinking water.
•Provides the surface with resistance to both negative and positive water pressure.
•Easily settles into capillary cracks, fills such cracks, forming a crystal structure, and so

ensures waterproofing.

Application Surfaces
Indoors and Outdoors Walls
Waterproof bathrooms, showers before laying ceramic tiles
Waterproofing of small terraces & balconies & decorative pools
Concrete Indoors and Outdoors Floors
Cement based trowel coating

Limitations
•Not for use as a standalone, below-grade waterproofing product for commercial applications or for depths greater than 10 feet (3,05 m)
•The material applied should be moisturized and protected from exposure to direct sunlight and such factors as frost for 5 days following the application.
•The product should not be applied to such surfaces, which are exposed to risk of freezing within the next 24 hours, which are frozen or the frost of which is thawing.
•Only use at temperatures between 45°F and 95°F (7°C and 35°C).
•The product should not be applied on extremely windy weather conditions or on hot surfaces, which are exposed to direct sunlight; and in the cases, where application is imperative under such conditions, the environment and the surface should be prepared for application in advance.
•The product should not be applied in rainy weather conditions, and the application surface should be preserved from rain for a period of 24 hours.

Laboratory Tests Results
Compressive strength – ASTM C109 (CAN/CSA-A5)
7 days > 3,500 psi (24,1 MPa)
28 days > 3,600 psi (24,8 MPa)
Flexural strength – ASTM C348 (CAN/CSA-A23.2-8C)
7 days > 1,000 psi (6,90 MPa)
28 days > 1,100 psi (7,59 MPa)
Pull-off strength (rupture of concrete) – ASTM C1583 (CAN/CSA-A23.2-6B)
28 days > 145 psi (1 MPa)
Permeance (ASTM E-96) 20 perms (mixed with water); 16 perms (mixed with a 1-to-1 dilution of Planicrete AC and water)
Resistance to freeze/thaw cycles Good
Resistance to de-icing salts – ASTM C672, 40 cycles (CAN/CSA-A23.2-16C) Good – 1 rating
Permeability to chlorides – ASTM C1202 (AASHTO T277) Very low – in the range of 100 to 1,000 coulombs
Density 105 lbs. per cu. ft. (1,7 kg per L)
pH 11,5
VOCs (Rule #1113 of California’s SCAQMD) 0 g per L

 

Application Thickness Coverage
3/64″ (1,2 mm) 150 to 175 sq. ft. (13,9 to 16,3 m2)
5/64″ (2 mm) 89 to 133 sq. ft. (8,27 to 12,4 m2)
1/8″ (3 mm) 59 to 67 sq. ft. (5,48 to 6,22 m2)
3/16″ (4,5 mm) 38 to 44 sq. ft. (3,53 to 4,09 m2)

HTML Templates