ULTRA PREMIUM SELF-LEVELING UNDERLAYMENT
MEETS TS EN 13813, Class C35-F7-A22 STANDARTS
Premium Calcium Aluminate Based
Compressive Strength > 4,000 Psi
Just Add Water
No Need To Trowel
For Repairs Up To 1/2”
Tile After 24 Hours
LEVELVOX 505X CALCIUM ALUMINATE BASED Self Leveling Underlayment
Helps leveling floors prior to the installation of ceramic tile, natural stone, resilient flooring, carpet, wood and other floor coverings. This underlayment can be applied to 1/2” (1.27 cm) thick in one pour and seeks its own level in minutes.
Meets and Exceeds ASTM C1708 and ASTM C627 standards.
Levelling concrete slabs and cementitious screeeds.
Under wood, laminated parquet, carpet, PVC, linoleum and ceramic flooring.
Levelling existing concrete pavements, terrazzo, ceramic and natural stone.
Floors subject to high loads and heavy traffic like depots against dusting and abrasion.
Use with PRIMERVOX ACRYLIC 505P.
Can be spread in thicknesses up to 10 mm per coat without shrinkage, cracking or crazing.
Suitable As An Underlayment For
Vitreous, semi-vitreous or non-vitreous tile
Ceramic, mosaic or quarry tile
Impervious porcelain and glass tile
Cement-based precast terrazzo
Natural stone tile & Carpet
Wood, parquet & Vinyl composition tile (VCT)
Sheet vinyl flooring & Laminated flooring
Suitable Substrates & Absorbent concrete
Existing ceramic tile & Cement terrazzo
Exterior grade plywood & OSB
Cutback adhesive residue
Composition of Product
LEVELVOX 505X Self Leveling Underlayment dry blend of copolymers, CALCIUM ALUMINATE BASED cements and inorganic chemicals.
Limitations to the Product
The substrate must be solid, dry, free of dust, loose parts, paint, wax, oils, rust and traces of gypsum. Highly absorbent or smooth.
Do not bond directly to hardwood, Luan plywood, particle board, parquet, cushion or sponge-back vinyl flooring, metal, fiberglass or plastic.
Standards ASTM International (ASTM)
ASTM C1708 Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements
ASTM C627 Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester ASTM F1869
|Property||Test Method||Typical Results|
|Pot Life||15 minutes|
|Flow Time||18 minutes|
|Compressive Strength at 28 days||ASTM C-109||>4,000 psi|
|Flexural Strength at 28 days||ASTM C-109||>800 psi (5.5 MPa)|
|Walkable Hardness||12 Hours|
|Robinson Test||ASTM C627||Extra Heavy|
|Time Before Installing Floor Covering|
|Ceramic tile||18-24 Hours|
|Most Floor Coverings||30 Hours|
|Installed Density – Dry||approx. 118 lbs/cu ft|
|Coverage (sq ft)||Coverage (sqm)|
|1/8″ (3.2 mm)||46||48||4.3||4.5|
|1/4″ (6.4 mm)||23||24||2.1||2.2|
|3/8″ (9.5 mm)||15.3||16||1.4||1.5|
|1/2″ (12.7 mm)||11.5||12||1.07||1.1|
|3/4″ (19 mm)||7.7||8||0.72||0.74|
|1″ (25.4 mm)||5.7||6||0.53||0.56|
|1 1/2″ (38 mm)||3.8||4||0.35||0.37|
|2″ (51 mm)||2.9||3||0.27||0.28|