Ürünler

Advanced Acrylic primer/sealer that prepares surfaces for the application of LEVELVOX 505X Self­-Leveling Underlayments.

It seals porous and non-porous surfaces and improves the bond of underlayments.
Prepares surfaces for self-leveling underlayments
Prevents cracks on self-leveling underlayments.
Improves adhesion
Seals porous and non-porous surfaces

Suitable Substrates
• Absorbent concrete
• Non-absorbent concrete
• Lightweight concrete
• Cement terrazzo
• Exterior grade plywood
• OSB
• Cutback adhesive residue
• Resilient flooring

Limitations to the Product
Do not bond directly to hardwood, Luan plywood, particle board, parquet, cushion or sponge-back vinyl flooring, metal, fiberglass, plastic or OSB panels.

Application of Product
Stir using a low speed (300 rpm) power mixer; do not over-mix. Apply thin coat with broom. Let it dry to a clear film (1 to 3 hours) before applying a self­ leveling underlayment. Highly porous concrete surfaces may require a second coat of primer.

Storage
Store in a cool dry area. Keep from freezing. 24 months when stored in the original sealed packing in dry place.

Health Precautions
This product contains acrylic emulsion. Avoid eye contact or prolonged contact with skin. Wash thoroughly after handling. If eye contact occurs, flush with water for 15 minutes and consult a physician. Do not breathe dust; wear a NIOSH approved respirator

Conformance to Building Codes
Installation must comply with the requirements of all applicable local, state and federal code jurisdictions.