Thermavox Fix 303X
FLEXIBLE POLYMER-MODIFIED ADHESIVE MORTAR FOR THERMAL INSULATION PANELS
THERMAVOX FIX 303X FLEXIBLE POLYMER-MODIFIED ADHESIVE MORTAR FOR THERMAL INSULATION PANELS
Use On Eps, Xps, Foam, Rockwool
Resistant To Temperature Changes
THERMAVOX FIX 303X is polymer modified, cementeous-based, highly adhesion strength mortar for thermal insulation panels with high flexibility with reduced slippage, which is resistant to water, frost, high temperature and temperature changes and enables more secure adhesion
Areas of Usage
THERMAVOX FIX 303X is used for all kind of thermal insulation panels (EPS, XPS, Rockwool) in indoors and outdoors spaces of all buildings.
Application surface must be clean, dustless, dry and strong. The Surface must be cleaned off all kinds of oil and rust that can weaken adherence and no loose particles must be present. Disordered surfaces must be repaired before application. Defective surface must be repaired by RepairVox 15R to create a smooth flat surface for application.
The surface and ambient temperature should be between + O5 and + 35O C at application.
Application surface must be free of oil, dirt, dust etc.
Mix by a 120 RPM mixer.
Mixture must be consumed in max. 2 hours.
Any such substance (except water) should not be added to the mortar prepared.
Product is more durable than former plasters with regard to external factors.
Surface should be protected from external factors.
|Hollow specific bulk gravity of adhesive||1500 ± 100 kg/m3|
|Sieve analysis (in excess of 1mm)||≤ %1,0|
|Compressive strength||≥ 6,0 N/mm2|
|Adhesion strength to the bottom layer||≥ 0,5 N/mm2|
|Adhesion Strength to Panel||≥ 0,08 N / mm2|
|Water absorption after 30 minutes||≤ 5 gr|
|Water absorption after 240 minutes||≤ 10 gr|
|Mixing Ratio||6-7 lt. water / 25 kg. pack|
|Consumption||4-5 kg. / 1 m2|
|Reaction to fire||A1 % < 1|
|Pot life||2 hours|
|Shelf life||1 year|
|Time of being ready to use||5 minutes|